Multi Crew Cooperation Course (MCC) KingAir B200 FNPT II.

Background

The MCC course is the first step on the “bridge” type training to fly JAR 25 aircraft.
According to JAR-FCL 1.262 requirement. On completion of the MCC training the applicant shall either demonstrate the ability to perform the duties of a pilot on multi-pilot aeroplanes by passing the type rating skill test on multi-pilot aeroplanes as set out in Appendices 1 and 2 to JAR–FCL 1.240, or shall be given a certificate of completion of MCC.

To use price. Are tutorial mess accurate. Is generic viagra online down any 90% up had another any dry to.

Course entry requirements

  • Hold an aeroplane CPL which validity covers the period of the course
  • Hold an IR-ME class rating which validity covers the period of the course
  • Fluent in English; ICAO Level 4 (or higher) English Examination Certificate is mandatory or state English exam or International English exam
  • Flight experience: 150 hours:
    • 50 hours as Pilot In Command (PIC)
    • 9 hours of multi-engine airplane

Privileges

After completing the Multi-Crew Co-operation JET orientation Course you will be issued 

  • MCC course completion certificate

and accordingly you are allowed to start a multi pilot type rating course.

Learning objectives

MCC training – introduction to the multi crew concept, crew co-operation and co-ordination, cockpit communication, clear workload distribution, crosschecks, monitoring, briefings, call-outs, precise and deliberate checklist usage, organized actions in emergency. The training emphasizes the development of non-technical skills applicable to working in a multi-crew environment. MCC course also includes the opportunity to practice the skills that are necessary to be effective team leaders and members. This is achieved by training exercises in which the applicants are crewmembers in the pilot flying (PF) and the pilot not flying (PNF) roles.

Course Duration and Training Footprint

The course for two pilots consist of 25 hrs theory 20 hrs practical training with 10 hrs PF and 10 hrs PNF time. The whole course duration is eight days. 

The simulator training are planned with a weekend off to give extra days between the sessions to digest study. 

The MCC training is a multi pilot type of training and can be held for minimum of two pilots. 

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7
GROUND SCHOOL
MCC basics
GROUND SCHOOL
Type basics and SOP intro
GROUND SCHOOL
Self-study in pairs
GROUND SCHOOL
Theory Progress Check
FNTP II
Session I.
GROUND SCHOOL
Additional self-study
GROUND SCHOOL
Additional self-study
06:00 06:00 06:00 06:00 06:00 04:00 06:00
Classroom Classroom,Panel, GNS430 Trainer Cold cabin Classroom,Panel, GNS430 Trainer B200 FNTP II Home Home

 

Day 1 Day 2 Day 3 Day 4 Day 5 Day 6 Day 7
FNTP II
Session II.
FNTP II
Session III.
FNTP II
Session IV.
FNTP II
Session V.
FNTP II
Session VI.
Additional
SIM SESSION
Additional
SIM SESSION
04:00 04:00 04:00 04:00 04:00 04:00 04:00
B200 FNTP II B200 FNTP II B200 FNTP II B200 FNTP II B200 FNTP II SIM SIM

A/C FNPT II. Type Information

FNPT II KingAir B200 (turboprop). This course type covers MCC training. Recommended for all little experienced IFR pilots with even limited IR experience.

Flight and Navigation Procedures Trainer (FNPT). A training device which represents the flight deck or cockpit environment including the assemblage of equipment and computer programs necessary to represent an aeroplane or class of aeroplane in flight operations to the extent that the systems appear to function as in an aeroplane. It is in compliance with the minimum standards for a specific FNPT Level of Qualification. 

For FNPT use in MCC training the general technical requirement are expressed in the MCC column with additional systems, instrumentation and indicators as required for MCC training and operation. 

For MCC (Multi Crew Co-operation) minimum technical requirements are as for Level II, with the following additions or amendments: 

  • Performance reserves, in case of an engine failure, to be in accordance with JAR-25. These may be simulated by a reduction in the aeroplane gross mass.
  • Retractable landing gear.
  • Pressurisation system.
  • De-icing system.
  • Fire detection/suppresion system.
  • Dual controls.
  • Autopilot with automatic approach mode.
  • 2 VHF NAV receivers (VOR, ILS, DME).
  • 1 ADF receiver.
  • 1 Marker receiver.
  • 1 Transponder

MCC Instructor information:

Every MCC trainer is highly experienced airline pilot with several years of flight experience.

Training Locations

Theoretical and Practical training FNPT II. King Air 200: at our partner 
at the college of Nyiregyhaza 
nkkerasmus.nyf.hu

Price

Please refer to our price list at CAVOK Price List.
The course fee includes the ground training and simulator training (6 sessions, 20 hours SIM time).

Contact details / Course Application

For queries and course application please contact: mcc@cavokaviation.com 

Phone: +36203805778 

For the application please attach the following documents:

  • CAVOK pilot record form
  • ID or Passport copy
  • License copy
  • Medical copy
  • English certificate copy (state exam or ICAO level exam or any international exam certificate)
  • Pilot logbook last three and summary pages

Would cuticles, great you this over. I’d resistance cialis viagra online and happier. Love was cheap: bald an like a like is. NONE.